3x4x5 Cuboid
Step A
Ensure that two or less bars stick out of top layer.
Case 1
-
Case 2
-
Case 3
-
Case 4
U
Case 5
U
Step B
Ensure that two or less bars stick out of bottom layer.
Case 1
-
Case 2
-
Case 3
-
Case 4
D
Case 5
D
Step C
Ensure that corner bars only face the front on the top and bottom layers
Case 1
Combination of B, D, Lw
Case 2
Combination of B D Lw, then U
Step D
Rotate corners so that they do not stick out of the top layer.
Only Case
Rw U' B U B U
Step E
Move edge that sticks out to the top layer.
Case 1
-
Case 2
F, U and/or B
Step F
Move sunken edge to top layer on the left.
Case 1
-
Case 2
Rw, Lw and/or D
Step G
Swap sunken and edge that sticks out.
Only Case
Lw D' Lw F Rw U
Step H
Repeat steps E-G until no edges stick out of U and D Layers.
Only Case
-
Step I
Ensure that two or less bars stick out of u layer.
Case 1
-
Case 2
-
Case 3
-
Case 4
u
Case 5
u
Step J
Ensure that two or less bars stick out of d layer.
Case 1
-
Case 2
-
Case 3
-
Case 4
d
Case 5
d
Step K
Move corners that stick out face the front.
Case 1
Combination of B, d, Lw
Case 2
Combination of B d Lw, then u
Step L
Rotate corners so that they do not stick out.
Only Case
Rw u' B u B u
Step M
Move edge that stick out to the u layer.
Case 1
-
Case 2
F, u and/or B
Step N
Move sunken edge to u layer facing left.
Case 1
-
Case 2
Rw, Lw and/or d
Step O
Edge sticking out of back and sunken edge on left. Swap edges.
Only Case
Lw d' Lw F Rw u
Step P
Repeat steps M-O until no edges stick out of u and d Layers.
Only Case
-